RCX-StudioPro
It is a further advance in ease-of-use over the previous RCX-Studio.
Planning stageConvenient for preliminary planning
Emulator function addedGreatly reduce the time until software design / Up to two weeks shorter
Controller can be operated on a PC
Programs can be created and debugged even without connecting a controller. The cycle time can also be calculated at the same time.
Cycle time calculatorModel selection is easy / 2STEP
Easily calculate cycle time of operations between two points
Easy selection of the optimal robot for your facility. It is also easy to determine which portion of one cycle is using time.
Design stageImprove work efficiency
Easy-to-use operating controlsSpeedy setup
Program editing and data editing can be easily performed even without previous experience.
iVY2 editor providedIncreased work efficiency
Integration with iVY2 Studio means there's no need to switch software. Model registration when using robot vision can also be performed using only RCX-Studio Pro.
During start-up / After installationEasy status checking
Realtime trace / Application debugging functionInformation visualization allowws status checking
Continuos output of internal information current waveform can be obtained. Debugging information for multiple tasks can be displayed simultaneously.
| Usable ports | Ethernet only |
|---|---|
| Purpose | Application debugging |
| Sampling rate | Variable from 1 ms in ms units |
| Number of channels | 8 channels |
| Data that can be obtained |
|
MaintenanceShorter maintenance time
Data comparison toolGreatly reduced maintenance time / Up to two weeks shorter
Two specified items of data can be compared, and the difference shown visually. Comparison of entire ALL files and comparison of individual programs is also possible. Direct comparison with online data is also possible.
Data cables (5m)
List of functions
- *
- Function newly added in RCX-Studio Pro.
Installation and additional licenses
| Name | PC Installation | Additional licenses required |
|---|---|---|
| RCX-Studio Pro | Multiple PC platform | Number of PC in simultaneous use |
| RCX-Studio (Sale discontinued time) | Limited to one PC platform | Number ob PC platform |
Functional limitations without USB key (dongle)
| Function | USB key present | USB key absent |
|---|---|---|
| Full version | Functionally limited version | |
| Connectingto the controller | ○ | △
Data transfer only |
| Saving the file data | ○ | △ Backup only |
| Emulator function | ○ | ○ |
| Real time trace | ○ | △ Emulator only |
| Cycletime calculator | ○ | × |
| iVY2 editor | ○ | × |
| Data difference | ○ | △ Except data saving |
Specification
Software
| Model | RCX-Studio Pro [USB key (dongle) included] | KCX-M4990-10 |
|---|
One USB Key per PC required USB key is required for each PC if operated simulaneouely. If operated without USB Key, function of the software is limited.
- *
- The software can be used as a function-limited version even without the USB key (dongle).
Environment
| OS | Microsoft Windows XP / Vista(32/64bit) / 7(32/64bit)/ 8(32/64bit) / 8.1(32/64bit) |
|---|---|
| CPU | Intel® Core™2 Duo 2 GHz or higher is recommended |
| Memory | 1 GB or more is recommended |
| Hard disk | 80MB or more of free space in the RCX-Studio Pro installation destination |
| Communication port | Communication cable: serial communication port, Ethernet, or USB port USB key: USB port (one port) |
| Display | 1024 × 768 or higher resolution, 256 colors or higher |
| Other | CD-ROM drive Dedicated communication cable (for D-Sub or for USB) Ethernet cable (category 5 or higher) |
| Applicable robot controllers | RCX340 |
- *
- Microsoft, Windows, Windows XP, Windows Vista, Windows 7, Windows 8 and Windows 8.1 are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Other company names and product names listed in this manual may be the trademarks or registered trademarks of their respective companies.
Data cables (5m)
| Model | USB type(5m) | KGB-M538F-00 |
|---|---|---|
| D-Sub type 9Pin-9Pin(5m) |
KAS-M538F-10 |
Communication cable for RCX-Studio Pro.
Select from USB cable or D-sub cable.
- *
- This USB cable supports Windows 2000/XP or later.
- *
- Data cable jointly used for POPCOM+, VIP+, RCX-Studio Pro.
- *
- USB driver for communication cable can also be downloaded from our website.
List of functions
| Manual operations |
|
|---|---|
| Editor |
|
| Monitor |
|
| Wizard |
|
|---|---|
| Tool |
|
| Extended tools* |
|
| Vision* |
|
- *
- Function newly added in RCX-Studio Pro.
Installation and additional licenses
| Name | PC Installation | Additional licenses required |
|---|---|---|
| RCX-Studio Pro | Multiple PC platform | Number of PC in simultaneous use |
| RCX-Studio (Sale discontinued time) | Limited to one PC platform | Number ob PC platform |
Downloading from the web
The latest version can be downloaded from the website at no charge.
- *
- Member site registration is required.
Functional limitations without USB key (dongle)
| Function | USB key present | USB key absent |
|---|---|---|
| Full version | Functionally limited version | |
| Connectingto the controller | ○ | × |
| Saving the file data | ○ | × |
| Emulator function | ○ | ○ |
| Real time trace | ○ | △ Emulator only |
| Cycletime calculator | ○ | × |
| iVY2 editor | ○ | × |
| Data difference | ○ | △ Except data saving |
Related contents
Robotics Operations
Sales & Marketing Section
FA Sales & Marketing Division
127 Toyooka, Chūō-ku, Hamamatsu, Shizuoka 433-8103, Japan
Telephone +81-53-525-8350 /
Facsimile +81-53-525-8378
