EF2200iS
Generator products information is accessible from here.
120v-60hz 1-3kva
Representative model, spec.
Inverter
A computer-controlled inverter ensures high-quality electricity.
Economy control
Regulates engine rpm accordance with actual electricity load for greater fuel economy and quietness.
Circuit breaker
[Computer controlled]
Automatically cuts off the current when the output voltage exceeds the designated maximum capacity.
4-stroke OHV engine
Compact size, high power, low fuel consumption & low noise level.
Oil warning system
Engine stops automatically when oil level(pressure) has fallen below the prescribed level.
Auto decompressor
Light recoil starting.
DC output capability
Steady supply of 12V power.
Fuel gauge
Fuel level confirmation at a glance.
Tri-Handle
Easy to carry.
Soundproof type
Parallel operation
On all models
On some models
Specification Sheet
| Generator | |
|---|---|
| Type | Inverter type |
| Rated voltage (V) | 120 |
| Frequency (Hz) | 60 |
| Rated output (kVA) | 1.8 |
| Rated output (kVA) in Parallel use | 3.6 |
| DC output | 12V/3A |
| Engine | |
| Engine | MZ80 : 4-stroke OHV pressure air-cooled |
| Starting system | Recoil *1 |
| General | |
| L*W*H (mm) | 555*300*470 |
| Dry Weight (kg) | 25 |
| Fuel tank capacity(full)(l) | 4.7 |
| Operating Hours (Hr/ 1/4 load) | 10.5 (Economy control system : ON) |
| Operating Hours (Hr/ rated load) | 4.2 |
| Noise Level (db A)(7m)(1/4 load) | 57 (Economy control system : ON) |
| Noise Level (db A)(7m)(rated load) | 65 |
| Features | |
| Voltage regulator | Inverter |
| Circuit breaker system | Computer controlled and Mechanical controlled (RV receptacle for USA is “Computer controlled” only.) |
| Fuel level gauge | ◯ |
| Oil level warning system | ◯ |
| Pilot lamp | ◯ |
| Economy control system | ◯ |
| Acces. | |
| Parallel kit | Option |
| DC charging leads | × |
| Receptacle | |
|
|
Please read your owner's manual and all labels before operation.
*1 Recoil hand start
Illuminated Multi-Function LED Display
It is equipped with a multifunctional LED indicator with power display and warnings in cases for trouble. In addition, a LED light has been set up under the indicator so that the switches can be checked in dark places.
| Display | Activeation | Discription |
|---|---|---|
 |
Start the engine | The current power supply level is displayed by the output indicators. Acording to the power supply level, the output indicator(s) will come on. |
 |
Push the reset botton 3 times within 1 second in no-load running. | The accumulated operation time is displayed by output indicator lights "A" and "B". The light "A" flashes every 1000 hours the light "B" flashes every 100 hours ※Hour meter does not function when the generators are in parallel operation. |
 |
Over loading | The overload indicator light comes on when electricity over the rated output is required by the connected electrical devices, or when the inverter control unit overheats, or the AC output voltage rises. Then the AC protector will trip, stopping power generation in order to protect the generator and any connected electric devices. |
 |
The oil level falls below the lower level | The oil level warning light come on and then the engine stops automatically. Unless you refill with oil, the engine will not start again. |
|
Push the boost switch for 3 seconds | Output indicators come on consecutively when the generator is in boost mode. |
Boost mode switch
The boost mode switch raises up the number of rotation of the engine temporarily (for approximately 60 seconds). When using devices that require a large starting current, such as a compressor of a submersible pump or refrigerator, use this switch.
To enter the boost mode, push the boost mode switch for 3 seconds. to exit the boost mode, push the boost mode switch for 3 seconds again. After approximately 60 seconds of the boost mode, the generator will return to the normal mode automatically.
Feature Map
