Specifications

Model Name	CELL HANDLER™2
Dimensions	L 1350 × W 900 × H 1600 (mm)
Weight	Approx. 550kg
Power supply	Power supply: Single-phase AC 100 - 120 V / 200 - 230 V (-10% to +8%) Frequency: 50Hz/60Hz Transient overvoltage: overvoltage category level II or lower Temporary overvoltage of the main power supply: 2.5 kV or lower Power consumption: Average approx. 690W / Max approx. 990W Installed capacity: 1.2 kVA
X, Y, Z axes	AC servo motor
Operation control system	Touch panel display, mouse with optical wheel, mini keyboard
Memory device	Built-in 8TB HDD
External interface	Device front: USB 3.0 x 4
Camera	CMOS 2048 x 1544 pixels
Optical lenses	Bright field observation: 4x, 10x
Light source	LED
Sterilization lamp	UV 15W x 2
Air cleaning unit	HEPA filters x 2
Environmental conditions	Usage site: Inside the building Temperature Guaranteed accuracy: 23 ± 2°C / Guaranteed function: 10 - 35°C Relative humidity: Permitted range: 20 - 80% (there must be no dew condensation) / Optimum range: 45 - 60% Installation site - There must be no dirt, dust, or corrosive gas - The instrument must not be exposed to strong indoor lighting or direct sunlight as it may adversely affect the imaging processing - The instrument must be installed on a level concrete floor with a load-bearing capacity of at least 4900 N/m²
High magnification system	20x objective lens Phase contrast: 4x, 10x
Fluorescence system	LED light source for fluorescence observation 3 to 5-color fluorescent filters

Note 1: This device is intended for research use only and is not subject to the "Pharmaceutical and Medical Device Act" (PMD Act) concerning the quality, efficacy, and safety of pharmaceuticals and medical devices.
Note 2: Specifications and appearance are subject to change without prior notice for improvement purposes.
Note 3: The above information is based on our internal evaluations. Results may vary depending on the work environment, cell type, and other factors.

Dimension (Unit: mm)