How to operate

Explanation of intuitive way to control with RiDE

RiDE Lever
When you want to reverse or decelerate
use ONLY RiDE lever

Throttle Lever
When you want to run and accelerate
use throttle lever

Operation simulation

Step

Start engine

Neutral position after starting engine

Neutral

Monitor

Operation

Go forward

Only using throttle (right) lever

Forward

Monitor

Operation

Decelerate

Only using RiDE (left) lever or Off throttle

Reverse

Monitor

Operation

Decelerate and turn

Deceleration and turning at the same time

Reverse

Monitor

Operation

Go backward

Quick operate without release your hands from steering
Adjust the engine speed to go backward by only left hand operation

Reverse

Monitor

Operation

Stop engine

Reverse gate move to forward position after stopping engine
⇒ ease to re-boarding on the water, and easy to clean the pump after enjoying

Monitor

Operation

In following cases

If the throttle lever input is larger than the RiDE lever input:
Only the difference in the two inputs will be reflected in the acceleration.

Forward

If both lever inputs are at an identical level:
Only the level of input on the RiDE lever will be reflected in either decelerating or reversing.

Reverse

If the lever is let go whilst there is an input to the throttle lever, the speed will decelerate, and the craft will move forward at idling speed.

Forward

If the lever is let go whilst there is an input to the RiDE lever, the craft will go into neutral and it will come to a standstill.

Reverse > Neutral

How to operate