Skip to Main Contents


Easy operating procedure

Explanation of the driving-operation procedure of the generator.

First of all, please carefully read the manual provided with the product.

Here, the points of the basic driving-operation procedure are explained. Be sure to read the instruction manual attached to the product and start use only when familiar with all of the knowledge, safety information, and warnings related to the product. Improper handling may cause serious problems or accidents.

*The above procedure is the general operating procedure common to Yamaha generators. Since each model has its own equipment and way of handling, be sure to always thoroughly read the manual supplied with the product before use.

Basic operating procedure

STEP 1
Filling with oil
The generator does not contain oil at the time of purchase. Be sure to fill with the specified amount of oil.
STEP 2
Filling with gasoline
Fill with unleaded gasoline (fuel for motor vehicles) up to the red level.
STEP 3
Fuel cock ON
Turn the fuel cock to ON (open).
STEP 4
Engine switch ON
Turn the engine switch to ON (Start).
STEP 5
Pull the choke
*Not required when the engine is warm.
STEP 6
Recoil starterタ
Pull the recoil starter and start the engine.
STEP 7
Once the engine is warmed up, return the choke
When the rotation of the engine is stabilized, return the choke to its original position.
STEP 8
Switch the connection to the electrical equipment to ON
Connect the appliance to the electrical outlet and switch the power of the instrument to ON
Back to
Top